-BSS Operation and maintenance Engineer (Back Office):
-Knowledge tasks and works done:
-Ericsson BSC AXE810 integration, start-up and test of APG40, APZ212 33C and APG43 APZ 212 55
-Solving all AXE hardware faults (CP, RP’s, and APG40).
-Fixing APG40 problems, node change, external and panel alarms, and executing several procedure and solutions for APG40 problems.
-APG40 health check, Audit & Trouble report, CP/AP backups on tapes and restore from Tapes.
-Implement the required ACA upgrades and correction package loading for APG&CP
(ACA3, 4, 5,6,R6B,R8B,AGM17&18&19,CPA3/IPA13&CPA4/19) using SMO,OPS from OSS tools.
-Import SW package to SMO.
-AXE810 APZ212 33C/ APZ212 55 testing (RP communication test, forced EX selection CP-A/CP-B,FEX loading,..).
AXE810 APT configuration and test (GS,XM,MUX34,MUX3,CLM,ET155,ET4 firmware upgrade…).
-Integration and test of new hardware magazine (GEM,GDM-H,GDDM,ET4).
-Configuration and test of new boards expansion (RP’s,RPG3,RPP,RP4,RPI,DLEB,DLHB,CSPB…) .
-Extension and reconfiguration of TRAU (TRC).
-Configuration of PCU and NSVCI for GPRS.
-Create CSR with E/// & follow up, troubleshooting the problem etc.
-RBS Re-homing and BSC re-parenting using OSS, CNA,WINFIOL .
-SWAP BSC’s and TRC’s under MGW and MSS.
-Expansions and swap of Signalling links C7,ATER’s,A-interfaces for RBSC/TRC and MSC.
-Transformation (RAL TO RBL or RTB) change RPG from C7 to TRH and vice versa.
-Data transcript (DT) for Cells Integrations (using SYGWIN), and TRU Expansion.
-Ericsson RBS 2000, 2106& 2206 &Micro cell 2308 integration, troubleshooting & Fault Management.
-Remote support to RBS fault and new SW upgrade for RBS.
-Technical support for testers on field to solve RBS problems.
-Drop and de-drop of sites.
-Good experience using OSS tools (ALV, ALB, ASM, CHA, OPS, EMAM, BSM,CNA, SMO) totune radio parameters.
-Work order execution from # departments ( RF, BSS Eng, Implementation..).
-Good Knowledge on Radio Network features & Radio Network Parameters.
-Diagnose faults for abnormal sites behavior (ex: failed handovers, interference, drop calls).
-Activation of Statistics counters and Features on BSC, and monitoring Network KPI’s.
-Increasing of Sizes alterations.
-Following and answering the following reports: DCR, KPI radio for operation,TRC report,NPC report……etc.
-Collection of STS files from APG40 and using SMIA (OSS Tool) .
-Follow and solve Trouble Tickets (TT) Operations.
-Implementation of new frequency plans.
-Define and modify neighboring relations.
-Health check daily & weekly for BSC's.
I am Jaimin Patel.I will be graduating with an MS (concentration – Telecommunication Network) from NYU Poly Tech University, NY in May 2010. Particular highlights are:
I have strong analytical skills as I implemented various strategies in the client application which reduced the process and product lead times by almost 30-40%.
My job function required excellent communication, inter-personal skills and the ability to perform in dynamic settings and team structures.
Having done my engineering program in Telecommunication, I have great knowledge in the field of wireless and networking and I have the experience of using various kinds of software. I am very much interested in working in the field as I find it very instigating and rewarding.
Being a CCNA certified individual, I have a clear understanding of the full life cycle of wired, wireless, routing and networking. I also have experience in learning and excelling at new technologies as needed.
Jaimin Patel
jpatel14@students.poly.edu
M.S. in Telecommunication Network
201-747-4774
There is an ambiguity on my mind in choosing a specific knowledge domain in Telecom Industry. I realize my CV on different job portals has impacted the employers in a dubious state. My CV broadly classify my technical skill set - GSM GPRS EDGE CDMA UMTS - SS7 TCP IP ATM etc, while my hand on experience is on "Installation & Commissioning of 3G Capable BTS and MW" moreover I got involved in hardcore so-called techno commercial activity which I feel reflected the vulnerability to my presence on Job portals.
Amazingly I do get frequent job offers in my “area of interest” that is GSM - CDMA (Core Networking part- Switches, O&M) SS7, ISUP, CAMEL etc (purely live projects) for multinational clients. But what disheartens me the most is they only entertain minimum 3 to 5 years of experience candidates while I posses Zilch towards live - on hand experience in the said technologies. I do have architectural knowledge of those technologies and good understanding of its functionality but I am not welcomed by any company since I don't have experience.
I sometimes feel if the industry can create a way for aspiring, specialized in wireless technology candidates like me and develop a platform to allow us a chance to stand and work with experienced expertise under their supervision then I sincerely feel this approach could help people like me to grow with advanced approach of the wireless industry.
Shahnoor R. Khan
Email: shahnoor_k@yahoo.com
Mobile: +91 988 500 4924
Skills- 12+ years experience
*Software product development based on Layer-1 defined in WiMAX-16d,16e/WLAN-11n/Zigbee standards.
*RF Design and Development(RF Transceiver,RF passive circuits,VSAT sub systems),micro-controller programming to some extent.
*RF design software-Microwave office,EESof
*Familiarity to Software languages-Labview/MATLAB/Simulink/C
*Project/Product management
RSS
|
About Us
|
Advertise With Us
|
Feedback
![[Valid RSS]](images/valid-rss.png "Validate my RSS feed")