| Posted On |
Description |
Location |
|
2010-Feb-22
|
Construction Manager
Company: NetworkersMSB
Skills: Project Management/Construction Manager
Description:
Accountable for all Civil Works and associated financial control via Scheduling (time), SP/ASP and Quality Management on a given project. Ensure
Accountable for all Civil Works and associated financial control via Scheduling (time), SP/ASP and Quality Management on a given project. Ensure that all Service Providers are adhering to Ericsson standards, processes and procedures as well as all Federal and Local standards. Identifies continuous improvement opportunities. Responsibilities Include Assess and control charges to the agreed site design Assures that: o Only Customers approved materials are installed on the project o The agreed Civil Works guidelines and schedules are followed and enforced. Attend coordination and progress meetings Awareness and on-site supervision during where risk of disturbances in customer site performance is high. Check that the working environment is maintained at an acceptable level, carry out safety inspections and ensure that tools, etc. are in good working condition. Civil Works problem solving as required during the project. Coordinates site activities and assures that all disciplines directly involved in the project are in phase with the Project goals and objectives. Drive schedule activities and trouble-shooting results. Ensure that: o Service Providers and vendors/suppliers meet all the technical specifications with respect to E/// and customer specifications. o Workmanship quality of the installations done by the Service Providers is within the Contract, Ericsson standards and Customer expectations. o All Ericsson, Federal, Local, and customer safety guidelines and construction procedures are enforced during the entire Civil Works phase of the project. Knowledge in workers safety and work environment safety. Perform: o Site pre-inspections and coordinate post-construction audits. o Site verification. o Visual inspection of quality on site. Prepares regular interval progress reports as required by the project Provide accurate status information on the progress to project management. Provide technical assistance to the Service Providers and any other suppliers that provide services associated with the Civil Works activities. Reject wrong deliveries of material to site. Report bad performance and quality on site. Responsible for the proper interpretation and compliance of the civil design plans. Supervise, coordinate and monitor works with the Service Providers and other disciplines that have an interface with the Civil Works part of the project. Team leadership focusing on quality and results. Write claims, order and return materials. Maintain and update construction-specific areas of Site Handler including but not limited to the following: o SOW and preconstruction documents (NTP, SOW, RFDS, safety guidance, QA standards, etc) o NTP receipt verification o RFDS submission review and changes o Civils acceptance documents, submission receipt, review and approval o Civils progress PFA verification (daily) o Close out document review and acceptance sign off
Start Date: 2010-02-08
|
Pleasanton, California, United States |
|
2010-Feb-17
|
Implementation Manager
Company: NetworkersMSB
Skills: Requires knowledge: o AXE 501, AXE 810 3G UMTS,BTS 2100 NODE B 3100 DAX
Description:
Manage all aspects of Telecom Equipment deployment from: Customer relationship, project plan of record, project schedule, cost, inventory, billing-
Manage all aspects of Telecom Equipment deployment from: Customer relationship, project plan of record, project schedule, cost, inventory, billing- invoicing, change control and scope creep. ASP process adherence, compliance and deliverables. Responsibilities include Coordinate Equipment deployment with Service Providers and any other disciplines that interface with the Customer Network facilities, central office or Cell site properties and access. Direct or complete market level Equipment deployment activities including, but not limited to the following: o Site Survey o BOM required o Coordination of: ‒ Dimensioning Engineering documentation ‒ Implementation Engineering documentation ‒ Integration Engineering and Data Translation documentation ‒ CIQ information: ATND, STND, RND TND ‒ Coordination and submittal of MOP documents. ‒ Coordination of installation and integration resources o Manages all request and changes to Data translation scripts o Identify and manage all work required to complete and acquire NTP o NTP hand off to services integration team Network equipment deployment problem solving encountered by the Service Providers. Ensure that the agreed implementation schedules and guidelines are followed and enforced. Submits regular daily/weekly/monthly progress data to the CPM (IM2 or IM3). Attend internal coordination and progress meetings, providing updates as needed. Ensure that quality of the Service Providers work is within Ericsson standards. Maintain a good working relationship with the Customers representatives and all disciplines involved in the project. Coordinates activities and ensure that all disciplines directly involved in the project are in line with the Project goals and objectives. Ensure proper records are maintained for all Equipment deployment. Responsible to maintain all project milestone data in Site Handler.
|
Los Angeles, California, United States |
|
2010-Feb-02
|
UMTS Development Project Manager
Company: NetworkersMSB
Skills: PMP/PMI certified preferred
Description:
Assist and monitor the vendor in implementation and successful completion of existing site survey and file audit activities.
The purpose of
Assist and monitor the vendor in implementation and successful completion of existing site survey and file audit activities.
The purpose of those activities is to determine existing leasing and entitlement rights/obligations and site-specific equipment configurations and infrastructure (electric/telco)
Communicate T-Mobiles position on lease/permit language interpretation to promote correct and consistent existing site lease/permit analysis by vendor.
Perform (or assist) in survey/audit validation (QA) activities, and report findings
- Interface between vendor and T-Mobile UMTS RF to assist in RFs timely completion of site-specific UMTS equipment design configurations that are achievable within T-Mobile deployment guidelines.
Review vendors UMTS equipment configuration options with objective of assisting RF, vendor, etc in agreeing on best design to meet UMTS performance, financial and deployment feasibility and timeline targets
- Provide strategic input, oversight and validation of vendors scoping of site-specific leasing and/or permitting activities deemed appropriate to implement the proposed RF UMTS equipment configuration.
Instruct vendor on T-Mobile guidelines for acceptable UMTS leasing and permitting activities and deliverables
Point of contact for vendors escalation of lease and permit issues outside of guidelines
Strategize with vendor on Market-specific plans for vendors successful completion of scoped leasing and/or permitting activities with site landlords and jurisdictions.
- Monitor vendor deployment production plan and schedule. Identify schedule deviations or challenges and work with team to correct production problems
Understand and monitor various program reporting tools. Suggest enhancements when appropriate.
Coordinate appropriate stakeholders- vendor, Region, Market deployment, etc to address specific UMTS deployment plan challenges
- Point of contact between UMTS deployment team and activities and Markets new site (2G) deployment team/activities.
Ensure UMTS deployment does not interfere with 2G new site deployment objectives
Identify opportunities for shared deployment (UMTS and new 2G sites) activities
- Other activities that may be required.
Scope of Leadership Responsibilities: Manages Project delivery with Regional, Market & Field Services Center Engineering teams.
Competencies: To perform the job successfully, an individual should demonstrate the following competencies:
Project Management - Develops project plans; Coordinates projects; Communicates changes and progress; Completes projects on time and budget; Manages project team activities.
Teamwork - Balances team and individual responsibilities; Exhibits objectivity and openness to others\' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone\'s efforts to succeed.
Analytical - Synthesizes complex or diverse information; Collects and researches data; Uses intuition and experience to complement data; Designs work flows and procedures.
Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics.
Managing People - Includes stakeholders in planning, decision-making, facilitating and process improvement; Takes responsibility for team activities; Makes self available to stakeholders
Minimum Required Skills / Competencies:
A minimum of 7 years wireless telecom development project management experience
Specific wireless site leasing, zoning, construction and site modification experience
Career shows progression in responsibility, size and complexity of projects managed.
Demonstrated ability to manage and interface with large multi-functional project teams.
Must possess successful project management as well as experience in process engineering.
Demonstrated ability to forecast, manage and deliver financially successful projects.
Engineering background in the area of Telecommunications with Wireless Telecommunications considered a valuable asset.
|
Santa Anna, California, United States |
|
2010-Feb-02
|
RF Engineer UMTS NPI
Company: NetworkersMSB
Skills: Minimum 3 years experience in NPI projects, from which 2 year should be in UMTS NPI -Experience with
Description:
**Minimum 3 years experience in NPI projects, from which 2 year should be in UMTS NPI -Experience with the different RAB services (CS, PS, HSDPA,
**Minimum 3 years experience in NPI projects, from which 2 year should be in UMTS NPI -Experience with the different RAB services (CS, PS, HSDPA, EUL) -Experience optimizing network using statistics -Experience with the OSS (WRNO, RAN Explorer, Element manager etc.) and knows how to operate them -Experience with live data KPIs and tools. Business objects experience is preferred -Familiar with the RAN features in UMTS (P6 preferred) -Ericsson experience preferred.
|
Columbia, Maryland, United States |
|
2010-Jan-29
|
Microwave Design Engineers
Company: NetworkersMSB
Skills: Willing to relocate
Description:
Minimum 5 years of progressively responsible microwave backhaul network design and engineering experience
Bachelors of Electrical Engineering
Minimum 5 years of progressively responsible microwave backhaul network design and engineering experience
Bachelors of Electrical Engineering or similar field
Expert knowledge and skill in using microwave propagation and planning tools such as Pathloss or Ellipse
Working level knowledge and experience in IP networking
Experience working at communication sites/towers to validate dish alignment, installation quality, and support optimization is a must
Solid understanding and hands-on experience with microwave performance instrumentation and analysis tools
Excellent communication, interpersonal, and problem-solving skills
Ability to manage personal workload, vendors, and deliverables, to meet aggressive project timelines
Strong work ethic and team player
Candidates should be capable of climbing ladders/stairs while carrying test equipment
Valid, clean, drivers license required
|
ANY, Tennessee, United States |
|
2010-Jan-28
|
Construction Project Manager III Telecommunications
Company: NetworkersMSB
Skills: PMP certified preferred 5+ Years Telecom construction and installation management.
Description:
The Sr. Project Manager will coordinate all structural modification activity that comes from our internal or external customer applications to
The Sr. Project Manager will coordinate all structural modification activity that comes from our internal or external customer applications to add or extend equipment on our T-Mobile owned assets, responding quickly and effectively to all structural, regulatory and compliance issues. Focus will be applied to streamlining processes in order to facilitate the business development plan for the T-Mobile Tower team. The Sr. Project Manager will also assist Project Managers in resolving site specific structural modification and replacement activity as well as update our Tower Marketing teams of project status as they relate to inbound collocations. Focus will be applied to cycle time reduction, faster revenue commencements and improvement of customer satisfaction.
Coordinate and manage Vendors Performing QC/QA Inspections, Final Punch and site acceptance walks. Work with Vendors in Coordinating BOM\'s, NTP\'s, Equipment/materials shipments and shortfalls, operational troubleshooting.
|
Bellevue, Washington, United States |
|
2010-Jan-28
|
Synthesizer Engineer
Company: NetworkersMSB
Skills: Design, Testing, Troubleshooting, Documenting, and Production Handover of the TX portion of 850 RFM
Description:
Experience in RF Design, Simulation, Layout and Testing. Proficient with NWA, SA, Sig Gens, and other various lab equipment. Willing and able
Experience in RF Design, Simulation, Layout and Testing. Proficient with NWA, SA, Sig Gens, and other various lab equipment. Willing and able to travel to support builds and ramp-ups. Temporary 2nd shift possible.
BB Testing: BB stands for Baseband
Medusa HW:HW, better to use multicarrier BTS hardware
RFM: Radio Frequency Module
RRH: Remote radio head
NWA: Network analyzer
SA: Signal analyzer
Sig Gens: Signal generators
TX/RX Synthesizer: transmitter / receiver synthesizer
DC/DC Converters: direct current
|
Dallas, Texas, United States |
|
2010-Jan-28
|
Transmitter Design Engineer
Company: NetworkersMSB
Skills: Design, Testing, Troubleshooting, Documenting, and Production Handover of the TX portion of 850 RFM
Description:
Experience in RF Design, Simulation, Layout and Testing. Proficient with NWA, SA, Sig Gens, and other various lab equipment. Willing and able
Experience in RF Design, Simulation, Layout and Testing. Proficient with NWA, SA, Sig Gens, and other various lab equipment. Willing and able to travel to support builds and ramp-ups. Temporary 2nd shift possible.
BB Testing: BB stands for Baseband
Medusa HW:HW, better to use multicarrier BTS hardware
RFM: Radio Frequency Module
RRH: Remote radio head
NWA: Network analyzer
SA: Signal analyzer
Sig Gens: Signal generators
TX/RX Synthesizer: transmitter / receiver synthesizer
DC/DC Converters: direct current
|
Dallas, Texas, United States |
|
2010-Jan-25
|
Implementation Manager
Company: NetworkersMSB
Skills: Some one with plenty of experience in leadership roles. Energy and able to work as a Team.
Description:
Requires knowledge of the following products: o AXE 501, AXE 810 3G UMTS, Power PDU, EPDU. BTS 2100 series, UMTS Node B 3100 series cabinets,
Requires knowledge of the following products: o AXE 501, AXE 810 3G UMTS, Power PDU, EPDU. BTS 2100 series, UMTS Node B 3100 series cabinets, BBU power Requires an understanding of Core network connectivity (MSN, BSS, DAX- OC3) and RAN network connectivity- T1 NIU. to transport DAX
|
VARIOUS CITIES, Texas, United States |
|
2010-Jan-25
|
Customer Project Manager - NTC RF
Company: NetworkersMSB
Skills: PMP certified
Description:
The successful candidate will possess all the attributes of a strong (preferably PMI certified) Customer Project Manager and also possess the
The successful candidate will possess all the attributes of a strong (preferably PMI certified) Customer Project Manager and also possess the following capabilities: 1. RF Engineering Design, Rollout & Implementation, Optimization of UMTS & GSM Networks. 2. Experience in managing large teams of RF engineers, and drive test teams 3. Extensive experience in managing large network rollouts projects- RF Design, Pre and Post launch optimization. 4. Solid understanding of Network performance metrics and its impact on the end user experience- RF and UTRAN- (2G and 3G) 5. Extensive experience in managing Network Performance Improvement projects (NPIs) (2G and 3G) 6. Experience in managing project financials, change order management and driving towards improved margins 7. Proactive in identifying new add-on sales opportunities 8. Strong experience in scope definitions and cost estimates 9. Strong relationship building skills 10. Strong reporting, presentation and communication skills 11. Experienced in using SAP, MORE, SRM and Site Handler 12. The candidate should be able to work under pressure, and manage projects with tight timelines and limited resources. He/She would have RF/UTRAN engineering background with minimum of 3 years of experience in project management or in a related managerial role
|
Orlando , Florida, United States |
|
2010-Jan-25
|
Customer Project Manager
Company: NetworkersMSB
Skills: RF Eng. Eng. Implementation Design PMP Certified
Description:
The successful candidate will possess all the attributes of a strong (preferably PMI certified) Customer Project Manager and also possess the
The successful candidate will possess all the attributes of a strong (preferably PMI certified) Customer Project Manager and also possess the following capabilities: 1. RF Engineering Design, Rollout & Implementation, Optimization of UMTS & GSM Networks. 2. Experience in managing large teams of RF engineers, and drive test teams 3. Extensive experience in managing large network rollouts projects- RF Design, Pre and Post launch optimization. 4. Solid understanding of Network performance metrics and its impact on the end user experience- RF and UTRAN- (2G and 3G) 5. Extensive experience in managing Network Performance Improvement projects (NPIs) (2G and 3G) 6. Experience in managing project financials, change order management and driving towards improved margins 7. Proactive in identifying new add-on sales opportunities 8. Strong experience in scope definitions and cost estimates 9. Strong relationship building skills 10. Strong reporting, presentation and communication skills 11. Experienced in using SAP, MORE, SRM and Site Handler 12. The candidate should be able to work under pressure, and manage projects with tight timelines and limited resources. He/She would have RF/UTRAN engineering background with minimum of 3 years of experience in project management or in a related managerial role
|
various, Minnesota, United States |
|
2010-Jan-22
|
Software Engineer
Company: NetworkersMSB
Skills: C++, Java, HTML, MS SQL, PHP
Description:
The position requires a 100% time commitment and needs to start work as soon as possible. The position is located in Murray Hill, New Jersey.
The
The position requires a 100% time commitment and needs to start work as soon as possible. The position is located in Murray Hill, New Jersey.
The assignment will include two aspects
(1) support existing development in the area of new applications based on the user requirements for the web based security tool
(2) develop the software and environment for integration and updating of security audit and compliance test tools based on new requirements.
The combined assignment will support the integration of new security applications to be incorporated in the tool in a future release.
Qualifications:
Bachelor degree (Hons), Master or Bachelor degree in computer science
Applicant should be an innovative, self-starter, self-motivated thinker for developing concepts and implementing approaches.
Strong Programming web-based, application programming experience,Web programming experience, HTML, Java, PERL, CGI, etc.
MS SQL programming and reporting (Crystal Reports or SQL Reports) required and knowledge in Database Management Tool Administration a plus
Strong C/C++ expertise PHP Coding experience
Having working experience in web application (web2.0) is a plus
Familiar with Secure Coding Standards and has implemented or used secure coding practices.
Familiar with development environment in Windows, Linux, Solaris, MS SQl, Oracle
Flexibility in a changing requirements and translate into software implementation of the tool
Ability to effectively manage changing requirements
Translate customer requirements into development of the tool
Independent, self-starter who can work with a dynamic and highly motivated group of researchers and developers.
Strong Analytical and detailed-oriented
Familiarity with standard secure product (software) development lifecycles & Methodologies
Familiarity with setting up a test tool development environment and general security tools
Strong communication skills and be able to work independently (self managed)
Strong documentation skills for all work Previous experience working in the corporate environment would be a big plus
Customer focus, respond well to pressure
Can manage concurrent activities, yet retain control and direction
Financial, transportation, or health industry experience a plus
|
New Jersey, United States |
|
2010-Jan-21
|
Solution Architect, Applications Integration
Company: NetworkersMSB
Skills: Architect, Consultant, Messaging
Description:
Candidates should have a relevant technical degree (e.g. B.S./M.S.in Electrical/Computer Engineering) and at least 7 years practical experience
Candidates should have a relevant technical degree (e.g. B.S./M.S.in Electrical/Computer Engineering) and at least 7 years practical experience in the telecom services and solutions business with at least 3 years of that in pre-sales related activities.
-MMSC
- SMSC
- PPG
- SMS PDR (Pre-Delivery Router)
- Instant Messaging
- NextGen Messaging (SIP/IMS)
- Anti-Spam, Anti-Virus, Anti-Abuse
- Shortcodes
- Web based SMS & MMS integration
- Content Adaptation and Content Filtering.
Furthermore, candidates must have:
- Good written and oral communication skills (must speak & write English fluently)
- Eagerness to learn new technologies and explore new opportunities
- Ability to investigate and evaluate technical and business requirements and make relevant recommendations
- Able to work and produce targeted results with minimal supervision
- Networking personality that enables you to understand customer organizations and politics to discern approach and strategies
- Sound understanding of mobile operator business drivers and technology
- Self-starter attitude, able to demonstrate a strong sense of business ownership and leadership
- Ability to work across multi-national matrix organization.
- Ability to work across multiple layers of the customer organization and engage them throughout the scope of the project
|
Virginia, United States |
|
2010-Jan-21
|
Project Manager -UMTS Deployments
Company: NetworkersMSB
Skills: PMP, Deployments, UMTS
Description:
Major Activities and/or Essential Functions:
Develop a complete understanding of the customer's 2008 UMTS deployment needs.
Have a strong
Major Activities and/or Essential Functions:
Develop a complete understanding of the customer\'s 2008 UMTS deployment needs.
Have a strong Technical & Product understanding· Serve as principal interface between the customer, the project team and any internal/external partners participating in the project.
Create a proposal/contract suitable to each customer\'s needs.
Manage allocation of resources to ensure project/contract deliverables.
Review project/program financials for impact on schedule, variation and change control.
Develop the necessary project/program to fulfill the desired results of the customer.
Resolve discrepancies and provide solutions or alternatives when issues arise.
Manage complex projects/programs that have multiple customers, high volume and long time-spans.
Assess the financial impact of the project through comparing forecasted numbers with actual figures.
Provide leadership on multiple high-revenue projects of high complexity - typically with EF&I responsibilities for numerous products/services, multiple locations and ownership of other vendors.
Develops action plans to improve performance throughout the duration of the project/program.
Applies advanced principles, theories and concepts to achieve objectives in creative and effective ways.
Contributes to the development of innovative principles and ideas.
Works independently toward predetermined long-range targets.
Determines and pursues courses of action essential in obtaining desired outcomes.
Will have project leadership responsibilities.
EDUCATION/Qualifications:
Typically requires more than 6 years experience with a bachelors degree or equivalent experience.
PMP Certification or working towards certification desired.
Excellent Negotiation, Communication, Customer Interfacing, Leadership and Management skills required
Strong business acumen in planning and organizing, information integration, decision-making and ability to achieve results while focusing on customer requirements and business success.
Excellent planning and critical thinking skills
Broad knowledge of industry and competitor trends.
Masters in Computer Technology preferred. ·
Technical Knowledge - VoIP Technology knowledge desirable
|
Washington, United States |
|
2010-Jan-20
|
Technical Account Manager
Company: NetworkersMSB
Skills: Design, Performance, Client relations
Description:
Qualifications, Duties and Responsibilities
Extensive experience working in the wireless industry related to the RF network.
Actual
Qualifications, Duties and Responsibilities
Extensive experience working in the wireless industry related to the RF network.
Actual wireless operator experience, particularly in RF Design or Performance Engineering is a plus.
Existing strong relationships with RF Design and Optimization engineering teams in at least 1 major operator i.e (Verizon, AT&T, etc).
Outgoing personality with a motivation to develop relationships.
A hunter mentality for finding new opportunities for revenue.
Able to provide technical support in a timely fashion.
Acumen for the business side of the optimization and design industry.
Conduct meetings, presentations, and demonstrations about our products, often times without additional technical support.
Extensive knowledge of CDMA, EVDO, GSM and UMTS technologies, particularly RF and related OSS technologies.
Build constructive and effective relationships with departments, engineers and managers.
Keep the manager advised on all relevant matters.
Other:
Education: BSEE or equivalent technical background in RF Design or RF optimization. MBA a plus.
Travel: 50%
Position based: Near a major Airport, preferably in the western USA.
Experience: 5 years +
|
San Diego, California, United States |
|
2010-Jan-20
|
3G Radio Access Network Engineer
Company: NetworkersMSB
Skills: Commission, Integration, troubleshoot
Description:
Key tasks of the job as:
1. Commissioning, integrating, System verification & acceptance and troubleshooting for 3G Network Element . Develop
Key tasks of the job as:
1. Commissioning, integrating, System verification & acceptance and troubleshooting for 3G Network Element . Develop and maintain 3G RNC and NodeB project competence, process, and documents for network deployment.
2. Provide Project technical support for troubleshoot and resolve issues, escalations from project and overall responsible for the 3G RAN (RNC and NodeB ) network element technical Issue handling.
3. Work as Technical Help Desk function including 24/7 emergency on-call support on demand basis. Carry responsibility of Technical Analyst & Technical contact Point, Case Manager.
4. Understand and work to achieve ECC trouble ticket performance. Coordinate actions and investigation of technical Issues between Customer, regional care management, tier2/tier3/ Product Line support teams.
5. Organize and participate in pilot, FOA, SW/ CD deployment, Software and new feature verification, MOP generation as well as test case creation- execution.
6. Provide support to customers for operations and maintenance of RAN Network elements including competence transfer to customers operations teams for local and remote operations and maintenance tasks.
7. Serve as local customer interface and coordinate communication for services and issues between customer market teams and NSN or Ericsson service lines.
8. Supports operations services such as traffic rehomes, network retunes, feature activations, network modification and Performance analysis.
9. Support Customer Lab for SW/ HW New Feature verification and validation.
10. Ensure quality customer satisfaction survey targets and carry end to end RAN support function
11. Work as Project Support Engineer for atomization of the process and improve in efficiency & execution of the task
REQUIRED SKILLS:
- 4+ years experience in Project , technical support and Equipment implementation for 3G radio network controller elements ( RNC, NodeB ) in wireless communications networks, including understanding of Circuit Switch and Packet Switch Core network elements
- Has excellent IP, Unix experience and skills set.
- Understanding of network interface protocols, protocol analyzers and network specifications.
- Can independently use Network analyzer and other tools to troubleshoot technical problem
- Understanding of wireless network implementation and operations services.
EDUCATION:
Bachelors Degree in Electrical Engineering, Electronics Engineering, Computer Science, Computer Engineering, Telecommunications, or Information Technology
|
Texas, United States |
|
2009-Nov-25
|
NDI Engineer- SGSN/GGSN
Company: NetworkersMSB
Skills: Ericsson MK V, VI, SGSN, Juniper GGSN M120
Description:
Build configuration script files for SGSN & GGSN nodes
Travel to site and integrate SGSN/GGSN nodes into customer packet/data network
Configure
Build configuration script files for SGSN & GGSN nodes
Travel to site and integrate SGSN/GGSN nodes into customer packet/data network
Configure O&M port
Demonstrate data call
Perform Software Update
Complete Verification Documentation (Documents and processes will be provided)
Submit Weekly Status Reports to Service Implementation Manager (Documents and processes will be provided)
MOP creation and/or validation troubleshooting IP network and providing support
Candidate MUST have good to strong knowledge on Ericsson MK V, VI SGSN hardware and Juniper GGSN M120 nodes.
Weekly status reports/Project reporting.
Good communication skills.
Interaction with onsite customer technicians, project managers and Ericsson personnel/supervisors.
*** Mobile phone required.
|
Plano, Texas, United States |
|
2009-Nov-05
|
UTRAN Scripting Engineer
Company: NetworkersMSB
Skills: Ericsson RAN, UTRAN, deployment, optimization
Description:
In-depth understanding of all Ericsson RAN configuration, interfaces and protocols, and capability to develop scripts, configure and troubleshoot
In-depth understanding of all Ericsson RAN configuration, interfaces and protocols, and capability to develop scripts, configure and troubleshoot performance issues is REQUIRED.
Must have an in-depth understanding of RAN ATM transport network and capability to modify configurations according to established templates & script procedures.
Need to be proficient with Moshell/AMOS scripting, trace tools, CPP platform, COLI and xml scripting.
Experience with OSS PM and Business Objects are a plus.
Based on TND and kget from RNC/NodeB, develop AMOS Scripts using local AMOS Script Generation tools
Perform desk checks and review of Scripts using quality guidelines and release the Scripts to Implementation
|
Texas, United States |
|
2009-Oct-21
|
Core Network Planner, Canada
Company: NetworkersMSB
Skills: Core Network Design, ATM,IP,MPLS,billing, provisioning, OSS,Operations,RNC
Description:
Our Client is presently seeking a Core Network Planner to work with our Wireless Network Implementation Team located in Halifax, Nova Scotia.
Our Client is presently seeking a Core Network Planner to work with our Wireless Network Implementation Team located in Halifax, Nova Scotia.
The successful candidate will be responsible for the planning and engineering of our Wireless Core Network. He/she will design the core network architecture, dimension all interconnections between core elements and ensure all required functionalities are covered. The successful candidate will also be responsible for managing the life-cycle of network elements once the network is fully operational.
As the successful candidate you will have the ability to develop strong relationships with peers, management and key business contacts while demonstrating your ability to adapt, think outside the box while being able to handle multiple project deadlines and deliver several projects simultaneously.
Key Responsibilities include but may not be limited to:
Planning
Provide technical expertise for the clients technology decision and vendor selection from a core network perspective.
Plan interconnections with the PSTN and other wireless operators.
Provide technical expertise during the RFP process for the IMS solution
Plan and perform RNC site re-homing as required
Research, develop, write, validate/verify, and publish Installation Methods, Methods of Procedures and Change Application Procedures that support product/solution installation readiness within schedule and budget.
Prepare product/solution recommendations through proper Technology research.
Identify and specify product/solution tools, test equipment, and other materials required for installation and commissioning.
Evaluate product/solution for Installability
Engineering
Design clients core network architecture in the most cost effective manner using creative solutions to reduce network Capital Expenses without compromising quality of service (QoS).
Perform detailed engineering of the wireless core network (capacity, power requirements, detailed interconnection)
Participate in the integration, commissioning and testing of core network elements.
Drive Inter Operability Testing when network elements from different vendors are interconnected together.
Integrate new sites into the Base Station Controller, insuring all managed objects are created, handled and configured properly
Maintain close ties with the Switch Operations group in order to understand and correct all significant anomalies that affect Operations and Quality of Service.
Troubleshoot Network element configurations and interfaces when required
Support the implementation and optimization of access related features to maximize network performance and quality (power control, simulcast synchronization, soft handover, etc.)
Perform periodic network audits and inconsistency cleanups to maintain the health of the network as it evolves.
Perform troubleshooting to support the Operations group.
Qualifications:
Bachelors Degree in Electrical Engineering with a minimum of 7 years of experience with Wireless Core Networks or Technical Degree/Diploma with 10 years of relevant experience.
In depth understanding of wireless core network architecture.
Understanding of cellular network traffic analysis
Strong skills on Core Network Design of Wireless projects, defining topology and creating Material Lists, Engineering Notes and all the subsequent project documentations such as Installation and Deployment packages.
Hands on equipment experience, with proven participation of field integration activities.
Desirable knowledge on MSC translations and Datafill.
Knowledge on Network Capacity Assessment.
Understanding of cell and channel capacity concepts
Knowledge of various wireless broadband technologies
Working knowledge of various networks/ICT protocols (IP, ATM, MPLS, etc)
Working knowledge of backend systems connectivity (billing, provisioning, OSS)
|
Halifax, Nova Scotia, Canada |
|
2009-Oct-21
|
Manager Service Planning and Integration- Canada
Company: NetworkersMSB
Skills: IP, ATM, MPLS,Core Network Design ,BSS,MSC-S, RNC, HLR, EIR, AUC, MGW, SGSN, GGSN, IMS
Description:
Key Responsibilities include but may not be limited to:
Recruit & manage Core and Service Planning and Integration resources
Ensure
Key Responsibilities include but may not be limited to:
Recruit & manage Core and Service Planning and Integration resources
Ensure the core network architecture is engineered in an efficient & cost effective manner
Provide expertise related to Core Network and Service Platforms to support clients vendor decisions
Work with equipment manufacturers at creative solutions to optimize wireless services delivery taking into account clients market position and size
Foster a strong team environment where mutual respect with other departments and with our external contacts and partners is the norm
Provide regular performance feedback and engage team to work independently
Train and develop the team to achieve business objectives
Engage Marketing in a symbiotic relationship where desired and attractive wireless services as well as the extent of the required supporting technologies are understood
Manage the Department operating budget.
Work with selected equipment vendors at ensuring optimum knowledge transfer between staff and vendor resources.
Work closely with the Transport, Telephone Engineering and Translation resources to ensure connectivity between network elements is achieved prior to integration dates
Maintain close ties with the Switch Operations group (relationship allowing constructive feedback and continuous improvement) in order to understand and correct all significant anomalies that affect Operations (QoS and network availability).
Ensure his team has access to the proper expertise, tools and resources to engineer clients wireless core network and service platforms, including the following activities:
Engineer the core network architecture including MSC-S, RNC, HLR, EIR, AUC, MGW, SGSN, GGSN, IMS, Application nodes and other related network elements.
Integrate, interconnect, test and commission network elements in order to achieve full functionality.
Perform dimensioning of core network elements and service platforms based on market forecast.
Participate in core equipment selection & evaluation
Work in close collaboration with Network Performance group and help perform periodic network audits and run inconsistency cleanups to maintain the health of the network as it changes at the network level.
Lead and Assist vendors with the Planning and execution of software upgrades for all related Core and Services network elements, including post upgrade validation activities leading to acceptance of the new load.
Provide tier 3 level support to the Switch Operations group acting as a liaison to the vendor(s)
Support the Radio Network Engineering group in the implementation and optimization of access related BSS features having a configuration impact on the core network.
Perform traffic studies and conduct core network equipment forecasting.
Ensure all deployed service applications (IN, IM, OTA, IMS, etc.) are available to their full potential
Remain on the forefront of Wireless technology development and innovations so that the client can be in a position to offer value added services to customers
Qualifications:
Bachelor or technical degree in Electrical Engineering with a minimum of 10 years + of experience with wireless core networks.
Minimum of 3 years of management/leadership experience
Technical knowledge:
In depth understanding of wireless core network architecture
Understanding of cellular network traffic analysis
Strong skills on Core Network Design of Wireless projects, defining a topology and creating the Material Lists/Eng Notes and all the subsequent project documentations such as Installation and Deployment packages
Hands on Equipment experience, with proven participation of field integration activities
Desirable knowledge on MTX universal translations and Datafill
Knowledge on Network Capacity assessment
Understanding of cell and channel capacity concepts
Knowledge of various wireless broadband technologies
Working knowledge of various ICT protocols (IP, ATM, MPLS)
Knowledge of various wireless broadband technologies
Understanding of cell and channel capacity concepts
|
Halifax, Nova Scotia, Canada |
|
2009-Oct-21
|
Radio Network Engineer(s) ,Canada
Company: NetworkersMSB
Skills: ASSET 3G, Planet EV, Pathloss,RF,MIMO, OFDM,RF Optimization
Description:
The successful incumbent will have the ability to handle stress, face multiple deadlines and deliver projects simultaneously while establishing
The successful incumbent will have the ability to handle stress, face multiple deadlines and deliver projects simultaneously while establishing good working relationships with peers, management and business associates.
Responsibilities include but are not limited to:
Conduct field surveys & site evaluations for all potential wireless access sites.
Design wireless networks in the most cost effective manner using existing antenna support structures and other structures and creative solutions to reduce network capital expenses without compromising QoS
Perform analysis on a site-by-site basis to identify the need to add channels, antennas, base stations, extension cabinets, and other components.
Produce and issue work orders on a site-by-site basis to meet network capacity and QoS requirements.
Perform periodic network audits and inconsistency cleanups to maintain the health of the network as it changes at the site or network level
Manage the RF spectrum & perform RF Network Optimization
- Perform detailed RF engineering for client sites (antenna selection, power level adjustment, noise calculation, link budget calculation, etc.)
- Work closely with the Property Management and Network Implementation teams in order to optimize the efforts of all network access deployment teams.
- Maintain close ties with the Operations group (relationship allowing feedback) in order to understand and correct all significant anomalies that affect Operations and QoS.
- Perform technical evaluations of new RF-related technologies
Assume responsibility for the implementation and optimization of access related features to maximize network performance and quality (power control, simulcast synchronization, soft handover, etc)
Perform troubleshooting to support the Operations Group
Analyze traffic studies and conduct Base Station and equipment forecasting
Qualifications:
Bachelors Degree in Electrical Engineering with a minimum of 7 years of experience with wireless access networks or Technical Degree/Diploma with 10 years of relevant experience.
Technical knowledge:
- Radio equipment and related accessories (coaxial cables, antennas, repeaters, low noise amplifiers (LNAs), etc.)
- Cellular network traffic analysis
- Radio Engineering rules (calculation of radio system noise, RF link budget, etc.)
- Propagation software (ASSET 3G, Planet EV, Pathloss, etc.)
- Automatic Frequency Planning (AFP) tools
- Integrated network optimization tools (TEMS)
- Knowledge of the GSM, CDMA or WiMax standards
- Traffic analysis
Point to point wireless backhaul design.
Knowledge of RF propagation properties in various frequency bands
Understanding of latest technology advances & concepts such as MIMO, OFDM
Understanding of cell and channel capacity concepts
Knowledge of various wireless broadband technologies
Understanding of cell and channel capacity concepts
Excellent computer skills
|
Halifax, Nova Scotia, Canada |
|
2009-Oct-21
|
Roaming Technical Expert(s)- Canada
Company: NetworkersMSB
Skills: Roaming, IOT,GSM, UMTS, Integration
Description:
The successful candidate will be responsible for all technical aspects and implementation of our clients roaming agreements. S/he will take
The successful candidate will be responsible for all technical aspects and implementation of our clients roaming agreements. S/he will take part in the roaming agreement negotiation process in a support role to the legal department ensuring the technical aspects of proposed roaming agreements are understood and will take part in the implementation and operations of roaming agreements from a technical standpoint after contract agreements are signed.
As the successful candidate you will have the ability to develop strong relationships with peers, management and key business contacts while demonstrating your ability to adapt, think outside the box while being able to handle multiple project deadlines and deliver several projects simultaneously.
Key Responsibilities include but may not be limited to:
Define technical requirements (high level and detail) desirable for client to enter into roaming agreements
Understand the upcoming changes in the condition of licenses of incumbent wireless carriers related to mandated roaming provisions
Assist the legal department in drafting a roaming agreement template that covers applicable engineering requirements and participate in roaming negotiations with other operators
Brief management on negotiation progress and ensure knowledge transfer on the technicalities of roaming
Monitor roaming performance and enforce service level provisions of executed roaming agreements
Through the use of proper tools and resources, execute and implement roaming agreements, including the following activities:
o Manage and execute roaming related IOT with roaming partners
o Perform thorough inter-carrier testing and work with Service Integration Team to ensure all deployed service applications included in roaming agreement are available to their full potential on both sides
o Ensure co-billing is working properly and facilitate billing information exchange, including CDR, between EastLink and roaming partners
o Implement roaming agreements from a technical and operational standpoint after contracts are signed
o Coordinate dimensioning of interconnections between client and roaming partners
o Work in collaboration with the Sim SME in fine tuning the profile related to roaming dispositions
Study and investigate solutions that would automate roaming testing in clients network
Investigate and provide 2nd & 3rd level support for roaming issues identified in client or a partner network
Participate in roaming forums or group led by the Wireless industry (GSM, UMTS etc.)
Qualifications:
Bachelors Degree in Electrical Engineering with a minimum of 7 years of experience with cellular networks (Core or Access, ideally both) or Technical Degree/Diploma with 10 years of relevant experience
Minimum of 2 years experience implementing roaming agreements a must
Technical knowledge:
Strong understanding of roaming specific requirements and areas of impact at all business levels
Understanding of wireless core network architecture
Understanding of multiple networking interfaces, including air interface
Understanding of cellular network traffic analysis (core and access)
Hands on Equipment experience, with proven participation of field integration activities.
Knowledge of PLMN selection process of wireless devices.
Knowledge on Network Capacity assessment.
Understanding of cell and channel capacity concepts
Knowledge of various wireless broadband technologies
Working knowledge of various ICT protocols (IP, ATM, MPLS)
Understanding of the concept of Carrier grade service
|
Halifax, Nova Scotia, Canada |
|
2009-Oct-21
|
Service Planner/Engineer(s)- Canada
Company: NetworkersMSB
Skills: VAS, SMS, MMS,Billing, Nodes, IOT,OTA, BGW
Description:
The successful candidate will be responsible for the planning and engineering of the clients Value Added Services (VAS) and Support Systems
The successful candidate will be responsible for the planning and engineering of the clients Value Added Services (VAS) and Support Systems nodes (OTA, BGW) for the wireless network. This will include designing the VAS architecture (IMS and non IMS), dimensioning all interconnections between platforms and ensuring all required functionalities are covered. S/he will evaluate the network and cost impacts of potential new service offerings. S/he will also integrate and commission the VAS nodes, manage their life cycle and plan appropriate software upgrades and hardware replacements.
As the successful candidate you will have the ability to develop strong relationships with peers, management and key business contacts while demonstrating your ability to adapt, think outside the box while being able to handle multiple project deadlines and deliver several projects simultaneously.
Key Responsibilities include but may not be limited to:
Planning
Provide technical expertise for clients vendor selection for VAS, Support and IMS platforms.
Evaluate technical complexity, costs, feasibility and implementation timeline of proposed VAS and Support System nodes
Provide technical expertise during the RFP process for the IMS solution
Research, develop, write, validate/verify, and publish Installation Methods, Methods of Procedures and Change Application Procedures that support product/solution installation readiness within schedule and budget.
Prepare product/solution recommendations through proper Technology research.
Identify and specify product/solution tools, test equipment, and other materials required for installation and commissioning.
Evaluate products/solutions for Installability
Ensure capacity of VAS and Support nodes is adequate and ensure required upgrades (Hardware and Software) are executed on time to meet clients capacity requirements.
Manage all aspects of Network Security
Engineering
Design clients Value Added Services architecture in the most cost effective manner using creative solutions to reduce network Capex
Perform detailed engineering of VAS and Support nodes (capacity, power requirements, detailed interconnection
etc.)
Participate in the integration, commission and testing of VAS and Support Nodes.
Lead Inter-operability testing (IOT) when nodes from different vendors are interconnected together.
Maintain close ties with the Switch Operations group and Billing group (relationship allowing feedback) in order to understand and correct all significant anomalies that affect Operations or Billing.
Perform periodic network audits and inconsistency cleanups to maintain the health of the network as it evolves.
Perform technology evaluations in support of the Wireless Marketing group.
Qualifications:
Bachelors Degree in Electrical Engineering with a minimum of 7 years of experience with Wireless Access Networks or Technical Degree/Diploma with 10 years of relevant experience.
Understanding of wireless core network architecture.
Understanding of cellular network traffic analysis
In depth understanding of data architecture to support VAS end to end.
Understanding of signaling flow for relevant VAS such as MMS, SMS, etc.
Strong skills on Data Network Design for Wireless projects, defining a topology and creating the Material Lists/Eng Notes and all the subsequent project documentations such as Installation and Deployment packages.
Hands on Equipment experience, with proven participation of field integration activities.
Desirable knowledge of IP related translations.
Knowledge of Data Network Capacity assessment.
Understanding of cell and channel capacity concepts
Knowledge of various wireless broadband technologies
Working knowledge of various ICT protocols (IP, ATM, MPLS, etc
)
IP security certification from recognized institution considered an asset
|
Halifax, Nova Scotia, Canada |
|
2009-Aug-17
|
LTE Lab DEsigner
Company: NetworkersMSB
Skills: Five to ten years of experience in advanced technology labs
Description:
Technical Skills:
- Expertise in building test beds, laying out floor diagrams and wiring diagrams.
- Expertise in acceptance and conformance
Technical Skills:
- Expertise in building test beds, laying out floor diagrams and wiring diagrams.
- Expertise in acceptance and conformance testing of telecommunication equipment
- Expert knowledge of IP infrastructure (Cisco certification preferred)
- Experience with 3GPP standard especially the ones related to LTE/EPC performance is required. Knowledge of S1, S3, S4, S6 and S7 interfaces and issues surrounding them is required.
- Experience with automated test tools. In particular with RAN emulation tools.
- Thorough understanding of data session flows and signaling from end-to-end for LTE/EPC is required.
- Good understanding of MME, SGW and P-GW .
- Good understanding of Policy Control. .
- Familiarity with the Microsoft office suite. In particular, Visio, Word and Excel.
|
Washington, United States |
|
2009-Aug-02
|
UMTS Optimization - RF Engineer
Company: NetworkersMSB
Skills: UMTS RF Optimization
Description:
Job Description:
RF Engineer will be required to perform moderately difficult tasks that require limited judgment and requires minimum supervision
Job Description:
RF Engineer will be required to perform moderately difficult tasks that require limited judgment and requires minimum supervision (confer with technical leads on unusual problems). Responsibilities include linking budget analysis, system dimensioning for coverage and capacity, initial system design and dimensioning and RF optimization of UMTS (3G- Universal Mobile Telecommunications Systems).
Essential Duties and Responsibilities: The area of responsibility will generally cover, several of the following activities -
Perform RF network design, planning and optimization activities
Perform link budget analysis, design criteria and traffic analysis
Ensure data integrity of various morphology/topography databases and drive test data for model calibration
Undertake network performance improvement (KPIs) and optimization tasks
Undertake BSS/RNC/Node B parameter modifications
Analyze and recommend equipment and antenna co-location requirements for different technologies
Perform site build verification and acceptance
Perform frequency and BCC planning and/or PN planning
Perform co-channel and adjacent channel interference testing and analysis
Required SKILLS:
A minimum of 2 to 10 years work experience in RF Optimization.
A minimum of 1 to 5 years solid work experience on UMTS Optimization
NetworkersMSB offers its Consultants the following: Paid major Medical and Dental benefits, Overtime and offer Direct Deposit through ADP
|
Anywhere in US, United States |
|
2009-Aug-02
|
UTRAN Engineer
Company: NetworkersMSB
Skills: Ericsson WCDMA RAN Network elements
Description:
REQUIRED SKILLS:
Minimum 2 years of experience working with Ericsson WCDMA RAN Network elements (RNC, RXI, RBS)
Ability to perform analysis
REQUIRED SKILLS:
Minimum 2 years of experience working with Ericsson WCDMA RAN Network elements (RNC, RXI, RBS)
Ability to perform analysis and investigation related to network and system performance.
Basic WCDMA Training and understanding of WRAN Architecture, Protocols & Procedures.
Knowledge of 3G network architecture elements and protocols (TCP/IP, ATM, SS7, etc)
Telecommunications and Data Networking theory understanding (Traffic Theory, OSI Model, etc)
DESIRED SKILLS:
Excellent written and verbal communication skills
Knowledge of Perl, VB, preferred
NetworkersMSB offers its Consultants the following: Paid major Medical and Dental benefits, Overtime and offer Direct Deposit through ADP
|
Anywhere in US, United States |
|
2009-Aug-02
|
RNC (Radio Network Control) ENGINEERS
Company: NetworkersMSB
Skills: Technical support RNC
Description:
JOB DESCRIPTION:
Manage the RNC which includes implementation, commissioning and integration with Node B and MGW/ PS core. Technical support
JOB DESCRIPTION:
Manage the RNC which includes implementation, commissioning and integration with Node B and MGW/ PS core. Technical support for the RNC which include routine RNC O&M (both preventative & corrective) and troubleshooting. To provide competence transfer on RNC O&M to the local engineers (on the job training).
Essential Duties and Responsibilities:
Technical support for the RNC which include routine RNC O&M (both preventative & corrective) and troubleshooting.
To provide competence transfer on RNC O&M to the local engineers (on the job training).
ATM/IMA knowledge and implementation
Troubleshooting on a network element and its interfaces
RNC internal parameter audit
Familiarity with NetTek and interface probes
OCNS implementation, commissioning, & integration.
REQUIRED SKILLS:
Minimum of 1 to 4 years experience in Ericsson and/or Nokia UMTS/WCDMA RNC (Radio Control Network)
Experience with Ericsson RAN & OSS system Technical support for the RNC which include routine RNC O&M (both preventative & corrective) and troubleshooting.
Creation of sites and neighbors (both UTRAN and GSM)
Understand Protocol analysis and call flow messaging
Create KPI & monitor Alarm on the OSS application
DESIRED SKILLS:
ATM/IMA knowledge and implementation
Good computer skills,
Able to work flexible hours,
Self- motivated and ability to work under pressure, good interpersonal skills
Strong communication skills required/Written and verbal
NetworkersMSB offers its Consultants the following: Paid major Medical and Dental benefits, Overtime and offer Direct Deposit through ADP
|
Anywhere in US, United States |
|